To Next Page
A
Adrian HernandezJul 29, 2025
How to fix ProForm 5.2 when the power does not turn on?
- Mmark23Jul 29, 2025
First, ensure the power cord is properly plugged into a grounded outlet. If using an extension cord, it should be a 3-conductor, 1 mm[2] (14-gauge) cord no longer than 1.5 m (5 ft.). Note that the treadmill isn't compatible with RCD-equipped outlets. Also, check that the key is correctly inserted into the console. Finally, examine the reset/off circuit breaker on the treadmill frame near the power cord. If the switch protrudes, the breaker has tripped; wait five minutes, then press the switch to reset it.
General
