What to do if ProForm 831.29604.0 power turns off during use?
If your ProForm Treadmill turns off unexpectedly, try these steps: First, check the circuit breaker located on the treadmill frame near the power cord and reset it if tripped. Next, ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Finally, remove and reinsert the key into the console.
How to fix ProForm 831.29604.0 if the power does not turn on?
If your ProForm Treadmill isn't turning on, check these items: Ensure the power cord is plugged into a surge suppressor that meets the specifications on page 10 and that the surge suppressor is plugged into a properly grounded outlet. Next, confirm that the key is inserted into the console. Lastly, check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes, wait five minutes, then press it back in to reset.
What to do if ProForm 831.29604.0 walking belt slips or is off-center?
If the walking belt on your ProForm Treadmill is off-center or slips, here's what to do: First, remove the key and unplug the power cord. If the belt is off-center to the left, use the allen wrench to turn the left rear roller bolt clockwise 1/2 turn. If it's off-center to the right, turn the bolt counterclockwise 1/2 turn. If the belt slips, turn both rear roller bolts clockwise 1/4 of a turn using the allen wrench.
To Next Page
General