EasyManua.ls Logo

ProForm 831.299263 - User Manual

ProForm 831.299263
26 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER'S MANUAL
¨
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal
Model No. 831.299263
Serial No.
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
SEARS, ROEBUCK AND CO.
HOFFMAN ESTATES, IL 60179
Patent Pending

Table of Contents

Questions and Answers

  • W
    William Vasquez DDSAug 12, 2025
    How to fix ProForm 831.299263 Treadmill when it won't turn on?
    • P
      Paul BrownAug 12, 2025
      If your ProForm Treadmill isn't powering on, ensure the power cord is plugged into a UL 1449 listed surge suppressor (TVSS) with specific ratings: a UL suppressed voltage rating of 400 volts or less, a minimum surge dissipation of 450 joules, and electrically rated for 120 volts AC and 15 amps. Note that the treadmill isn't compatible with GFCI-equipped outlets. Also, check that the key is fully inserted into the console, the circuit breaker near the power cord hasn't tripped (reset it after five minutes if it has), and the on/off switch is in the 'on' position.
  • P
    Pamela DelgadoAug 21, 2025
    What to do if my ProForm Treadmill turns off during use?
    • N
      nicholasperezAug 21, 2025
      If your ProForm Treadmill shuts off while you're using it, first check the circuit breaker located near the power cord and reset it if necessary by waiting five minutes before pressing the switch back in. Ensure the power cord is securely plugged in and the key is fully inserted into the console. Also, verify that the on/off switch is in the 'on' position.
  • S
    Scott RodriguezAug 31, 2025
    Why is the speed display not working on my ProForm 831.299263 Treadmill?
    • J
      jonathan55Sep 1, 2025
      If the speed display on your ProForm Treadmill console isn't working right, remove the key and unplug the power cord. Then, take off the hood and find the Reed Switch. Make sure the gap between the Magnet and the Reed Switch is about 1/8 of an inch. If needed, adjust the Reed Switch by loosening its screw, moving it slightly, and then tightening the screw again. Put the hood back on and test the treadmill to see if the speed reading is correct.

ProForm 831.299263 Specifications

General IconGeneral
BrandProForm
Model831.299263
CategoryTreadmill
LanguageEnglish

Related product manuals