4. Put a 2-lb. Weight (79) on the upper hooks on the Right
Weight Rack (99). Put a 4-lb. Weight (80) on the centre
hooks on the Right Weight Rack. Put a 6-lb. Weight
(81) on the lower hooks on the Right Weight Rack.
Put the remaining Weights on the Left Weight Rack
(not shown).
5. Remove the backing from the Adhesive Clip (121).
Press the Adhesive Clip onto the base of the Uprights
(102) in the indicated location. Press the Allen Wrench
(116) into the Adhesive Clip.
6. Make sure that all parts of the CROSSTRAINER are properly tightened. To protect the floor or carpet
from damage, place a mat under the CROSSTRAINER.
4
5
79
80
81
99
116
102
121
7
To Next Page
Loading...
Need help?
General