16
14. Orient the Storage Latch (52) so that the knob
(K) is on the side shown. Attach the Storage
Latch to the Left Upright (89) with two 1/4" x
4 1/2" Screws (6) and two 1/4" Star Washers
(26); do not overtighten the Screws.
14
89
6
26
52
K
15. Firmly tighten the four 3/8" x 2 1/4" Screws
(7), the two 3/8" x 1 3/4" Screws (62), and the
two 3/8" x 1 1/4" Screws (63).
Next, set the Left Inner Base Cover (100) onto
the lower end of the Left Upright (89). Then, slide
the Left Base Cover (82) downward and press it
onto the Left Inner Base Cover.
Next, set the Right Inner Base Cover (101) onto
the lower end of the Right Upright (90). Then,
slide the Right Base Cover (83) downward and
press it onto the Right Inner Base Cover.
100
83
82
62
89
7
7
63
62
101
63
15
90
To Next Page
Loading...
