Need help?Do you have a question about the Profoto A10 and is the answer not in the manual?
General| Type | Compact flash |
|---|---|
| Product color | Black |
| Approximate recycling time | - s |
| Camera brands compatibility | Canon |
Weight and Dimensions| Height | - mm |
|---|---|
| Weight | - g |
General safety guidelines for equipment use and handling.
Warnings about high voltage, capacitors, and battery safety.
Precautions regarding hot parts, specifically the front lens.
Notes on radio frequency usage and local regulations.
Information and warnings about laser safety.
Guidelines for product disposal and recycling.
Overview of the Profoto A10, its design, and capabilities.
Instructions for charging the Profoto A10 battery.
Steps to attach the battery and light shaping tools.
Procedures for turning the unit on and off.
Selecting between TTL and Manual modes.
Adjusting flash power relations and exposure compensation in TTL mode.
Adjusting light output for groups in Manual mode.
Managing continuous light, interface locking, and flash head activation.
Adjusting beam angle and testing flash synchronization.
Navigating and changing unit settings via the menu.
Configuring Air, Bluetooth, Head, and Sync modes.
Configuring Sync, Zoom options, and continuous light.
Managing ready signals, control sounds, and warning sounds.
Adjusting display brightness and standby modes.
Understanding the A10's light spread and zoom settings.
Attaching and using the Clic Dome accessory.
Attaching and using the Bounce Card accessory.
Instructions for updating the device firmware.
Restoring the device to factory default settings.
Regulatory information, certification and compliance marks.
World-wide radio spectrum usage and regional restrictions.
FCC and Industry Canada compliance statement and conditions.
FCC and IC RF exposure limits and guidelines.
Modular approval for sale and operation in Japan.
Third-party copyright, license terms, and credits.
To Next Page
