Profoto ProHead - Brief Instructions; Mounting Reflector

Profoto ProHead
6
www.profoto.com
Brief Instructions
• Removeprotectingcap.
• ConnecttheProHeadtothegeneratorlampheadsocket.
Mounting Reflector
The unique rubber collar fastening system provides secure and rapid handling and allows
the reflectors to fit all of the Profoto flashes, HMI’s and Tungsten heads. The rubber collar
allows the reflectors to be handled when hot.
• Unlocktheclasp.
• Slidethereflectorintodesiredposition.
• Securethereflectorbylockingtheclasp.
Lock clasp
Adjust reflector to desired
position before locking
MOUNTINGREFLECTOR
Unlockclasp