required, See Figure 6. Check local electrical codes. If you run the wiring in conduit and wish to
be able to turn the heater be sure to purchase enough flexible conduit to allow the heater to be
turned.
3. Connect the wire to the power block located in the base of the heater - See Figure 7.
4. Turn on the power at the main service.
CAUTION:
High temperatures – risk of fire. Keep flammable materials, such as furniture, pillows, bedding,
papers, clothes and curtains at least 3 ft. (0.9 m) from the front and top of the heater and keep
them away from the sides and rear.
To reduce the risk of fire, do not use it in areas where gasoline, paint or flammable liquids are used
or stored.
Figure 6
To Next Page
Loading...
