BLADE REMOVAL AND INSTALLATION
Two, 1/2” X 1 3/4” grade 5 bolts with lockwashers and nuts hold blade to blade
spindle support bar. When changing blades, be sure that these fasteners are in good
condition so they will not come loose during operation.
BLADE SHARPENING
IMPORTANT - When sharpening blades be sure to balance them. Unbalanced
blades will cause excessive vibration, which can damage blade spindle bearings.
Vibration may also cause structural cracks in spindle housing.
Follow original sharpening pattern as shown. Sharpen blade to a razor edge.
Protect hands when sharpening. Do not sharpen backside of blade.
BLADE SHARPENING
To Next Page
Loading...