66
FEATURES
ADJUSTABLE CHARGE RATE
The charger’s output can be adjusted to suit the size of the battery for optimum
charging.
REMOTE CONTROL DISPLAY*
Control and monitor the charger’s performance from a remote control display, allowing
the charger to be flush or surface mounted out of the way and out of sight. The battery
charger and remote are synchronised for operation either locally or by remote.
RUBBER END CAPS (IC25W ONLY)
Protective rubber moulded end caps for the toughest workshop conditions.
DIRECT INSTALLATION
IC25RV supplied with 1.5M length terminated leads for permanent fitment to RV. All
other models can be hardwired by removing their battery clamps to access cable lugs
(see page 13).
TEMPERATURE COMPENSATION*
The temperature sensor monitors the battery temperature and adjusts (compensates)
the charger’s output to prevent overcharging. This is ideal for batteries used in warmer
climates or environments.
SWITCHMODE TECHNOLOGY
LCD SCREEN & LED INDICATORS
POLARITY PROTECTION
OVER TEMPERATURE PROTECTION
MOUNTING INSTRUCTIONS
MOUNTING BATTERY CHARGER
Intelli-Charge chargers are designed for indoor,
out of weather use only. Ensure that both
charger and battery are in a well-ventilated
space during charging.
The battery charger end plates include a mounting
flange for easy mounting. If permanently fixed the
charger should be mounted to a suitable horizontal
or vertical panel, with at least 10cm clearance from
the end plates to provide adequate ventilation for
the cooling fan.
ON
OFF
CHARGE
RATE
BATTERY
TYPE
RECONDITION
VOLT/AMP
POWER ON
ABSORPTION
BULK
CHARGE
FULLY
CHARGED
IC35
12V 35A 7-STAGE
3.5mm
mounting hole
*Not included with IC25W
To Next Page
Loading...
Need help?
General
