PROLEC PME 500 - Page 5

Table of contents (continued)
7.6 Overload / Hydraulic Limitation Control Override
20
7.6.1 Soft Override
20
7.6.2 Master Override Key Switch
20
7.7 Lift Mode Menu
21
7.8 Lifting Point Selection
21
7.9 Lifting Duties
22
7.10 Load Chart Menu
23
7.11 Safe Working Area Indication
24
7.12 Lifting Mode - Non Lifting Mode
25
7.13 Alternative Lifting Mode Screens
26
8 Envelope Monitoring 27
8.1 Height Limit
28
8.1.1 Height Limits Menu
28
8.1.2 Height Limit Setting - Known Height
29
8.1.3 Height Limit Setting - Using Current Highest Point
30
8.1.4 Machine Envelope Controller (MEC) - Height
31
8.2 Max Radius Limit
8.2.1 Max Radius Limits Menu
32
8.2.2 Max Radius Limit Setting - Known Radius
33
8.1.3 Max Radius Limit Setting - Using Current Furthest Point
34
8.1.4 Machine Envelope Controller (MEC) - Max Radius
35
8.3 Min Radius Limit
8.3.1 Min Radius Limits Menu
36
Continued