Erasing programmes
1 Press the MENU button until the main menu appears.
2 Press the PR- button once. This moves the pointer to
‘PR preset’.
3 Press the OK button to see the programme pre-set menu.
4 Press the PR+ button twice. The pointer will move to
‘PR erase’.
5 Press the OK button to see the programme erase menu.
6 Press the PR- and PR+ buttons to move the flashing pointer to
the channel you want to erase. Press the button if you
want to check the picture.
7 Press the OK button to display the erase warning shown
opposite.
8 If you want to erase the programme, press the OK button. If
you don’t want to erase the programme, press the menu
button.
9 Press the MENU button to finish or go back to step 6.
18
PR ERASE
PR+/-:select
:PR view
OK:erase MENU:end
PR03 P-03
IMPORTANT!
The ‘OK’button will
erase this PR.
:PR view
OK:confirm MENU:end
PR01 BBC1 PR08 SKYS
PR02 BBC2 PR09 MTVE
PR03 ITV PR10 P-10
PR04 CHA4 PR11 P-11
PR05 SKY1 PR12 ----
PR06 SKYN PR13 ----
PR07 SKYM PR14 ----
MAIN MENU
Timer Program
PR Preset
VCR Setup
PR+/-:select
OK:confirm MENU:end
PR PRESET
Auto Set
Manual Set
PR Erase
PR Align
PR+/-:select
OK:confirm MENU:end
video recorder
Setting up the
To Next Page
Loading...
General