18 / 25
Replace vacuum hose
1. Detach the squeegee as described in above sections.
2. Remove the solution tank. You can see where the vacuum hose is connected at the C430BN
handle.
3. Hold the scrub deck firmly with one hand，
4. Detach the vacuum hose by twisting the connector 1/4 turn anticlockwise.
5. Now you can carefully pull the vacuum hose from the top of the machine.
6. Guide the new vacuum hose via the opening to the hose connector located at the C430BN
handle.
7. Connect the top to the hose connector by twisting the clockwise 1 /4 turn until they have
lined up.
8. Reinstall the squeegee.
Recommended additional cleaning
Clean the exterior of the C430BN weekly with a non-abrasive, non-solvent cleaner or a clean,
damp cloth. To clean the scrub deck, remove the brushes first
Decommissioning and disposal
It is the responsibility of the C430BN owner to dispose of the product responsibly
After decommissioning, the C430BN still contains valuable resources and needs to be disposed
of according to your local
laws and regulations regarding recycling of electrical equipment.
Hose connector
To Next Page
Loading...