Promise Technology VTrak N1008 - Page 11

8
Promise Technology VTrak N1008
5. Administrator permission is required to install the software. Type the administrator password of
your computer for permission to install the software.
6. You can change the location on your system for the installation if desired by clicking the Change
Install Location button. Otherwise click on Install to continue the installation in the default
location.
7. IttakesafewsecondsfortheUtilitysoftwaretobeinstalled.Whentheinstallationhas
completed,amessageinformsyouthattheinstallationwassuccessful.
8. Click Close to end the installation procedure.
The PROMISE Utility is now available to be used with the VTrak N1008.