Promise Technology VTrak N1008 User Manual

15
Managing the VTrak N1008Product Manual
usIng promIse utIlIty pro
Most system management can be done using PROMISE Utility Pro connected via network connection
through either 1G network port or via Share Port connection. Some more advanced system changes however
require using the WebPAM Insight web-based system management GUI. For example, if you want to change
the RAID, extend or change a Storage Pool, these operations must be done using WebPAM Insight. Keep in
mind that the VTrak is shipped ready to use, with the Disk Pool and RAID already congured, most users will
not need to change any of these. Also note that making changes to the RAID or Storage Pool conguration
will erase any data that is stored on the effected disks.
To use the VTrak, you rst need to install the most up to date hardware drivers and PROMISE Utility Pro
software. PROMISE Utility Pro allows the system administrator and collaborative users to copy and transfer
les, create private and public folders; this is also where users can enable File Boost to quickly send or
retrieve les between the Private volumes and the Public NAS folders.

Promise Technology VTrak N1008 Specifications

General

Brand	Promise Technology
Model	VTrak N1008
Category	Storage
Language	English