PROPOINT 8561110 - Personal Safety; Personal Protective Equipment; Personal Precautions

8561110
34° Clipped Head Framing Nailer
V1.0
5. Avoid unintentional misfires. Always use caution to
avoid accidentally firing. Do not point towards
yourself or anyone whether it contains fasteners
or not.
PERSONAL SAFETY
WARNING! Wear personal protective equipment
approved by the Canadian Standards Association (CSA)
or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide
front and side protection for the eyes.
a. Eye protection equipment should comply
with ANSI Z87.1 standards.
2. Wear gloves that provide protection based on the
work materials or to reduce the effects of
tool vibration.
3. Non-skid footwear is recommended to maintain
footing and balance in the work environment.
4. Steel toe footwear or steel toe caps to prevent
injury from falling objects.
5. Wear protective clothing designed for the work
environment and tool.
6. This tool can cause hearing damage. Wear hearing
protection gear with an appropriate Noise
Reduction Rating to withstand the decibel levels.
7. Wear a hard hat to protect your head from
falling objects.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work
environment to avoid personal injury or damage to the
tool.
4
For technical questions call 1-800-665-8685