PROPOINT 8561110 - Loading Tool; Loading Fasteners

8561110 34° Clipped Head Framing Nailer
4. Always disconnect air resource:
a. Before unloading or making adjustments.
b. When maintaining the tool.
c. When clearing a jam.
d. When touching the safety yoke.
e. When tool is not in use.
f. When moving to a different work area.
Such
precautionary measures reduce the risk of injury
to persons.
LOADING TOOL
V1.0
1. Do not load the tool with fasteners when any one of
the operating controls is activated.
2. Never place a hand or any part of body in fastener
discharge area of tool.
3. Never point tool at anyone.
WARNING: The warnings and precautions discussed
above cannot cover all possible conditions and
situations that may occur. It must be understood by the
user that common sense and caution are factors which
cannot be built into this product, but must be supplied
by the user.
LOADING FASTENERS
1. Connect the tool to the air source.
14 For technical questions call 1-800-665-8685