PROPOINT 8561110 - Cold Weather Operation

Vl.O
34° Clipped Head Framing Nailer
8561110
CAUTION: The work surface can become damaged by
excessive lubrication. Proper lubrication is the owner's
responsibility. Failure to lubricate the tool properly will
dramatically shorten the life of the tool and void your
warranty.
CAUTION: Lubricate tool only with specified lubricants.
CLEANING
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and maybe damaged by their use.
Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: Do not at any time let brake fluids, gasoline,
petroleum-based products, penetration oils, etc., come
in contact with plastic parts. Chemicals can damage,
weaken or destroy plastic which may result in serious
personal injury.
COLD WEATHER OPERATION
For cold weather operation, near and below freezing, the
moisture in the air line may freeze and prevent tool
operation. We recommend the use of air tool lubricant or
permanent antifreeze (ethylene glycol) as a cold
weather lubricant.
CAUTION: Do not store tools in a cold weather
environment to prevent frost or ice formation on the
tool's operating valves and mechanisms that could
cause tool failure.
Visit www.princessauto.com for more information
25