Understanding the TV features
o Multimedia = AH in one TV receiver, Video Honitor and PC display,
e Wider viewing angle for 16:9 and 4:3 display screens = over a 160 degree viewing angle and a
16:9 ergonomic display panel
• Digitan display device = Irrespective of magnetic or geomagnetic effects, this device accuratemy
reproduces images without any distortion or b_ur.
• Closed caption decoder = You may view specially labeUed (cc) TV programs, movies, news,
prerecorded tapes, etc. with either a dialogue caption or text dispJay added to the program°
• V=chip - Enables parents to prevent their children from watching inappropriate programs on TV.
• ATSC/NTSC
® Sleep timer
o MultHanguage OSD
Basic operation
Menu operation
Power ON/OFF
1. Connect the TV to a power outlet. If the power indicator is red, it means that the TV is switched off. Press the
Power button on the front control or on the remote control to switch on the T'v'. Once the Power button is
switched on, the power indicator will be displayed as blue. Several seconds later, the TV picture will be
displayed on the screen.
2. Press the Power button on the front control or on the remote control to turn the TV off temporarily.
3. Always remove the AC power plug from the outlet when not using this TV for a long period of time.
Signal source selection
Press the [:INPUT] button to select _', AV, S=Video,Component,VGA and HDIV]I inputs. There are two ways to
select the source: One is to press the [:INPUT] button continuously, while the other is to use the [ARROW] and
[ENTER] buttons to confirm the source.
Semect channels
Please use [CH+/CH-] button on the remote panel to select channels. [CH+] indicates channel number up;
[CH-] indicates channel number down. Press [CHA /ChV] button on the side panel of the TV to select the
channels. If you want to choose any of the skipped channels, press the number directly.
Use {_Mute] button
Pressthe [Mute] buttonto mute the sound, Pressthe [Hute] buttonagainto resume the sound.
Select picture modes
Press the [P:ICTURE] button to select the picture mode from four options: Standard, Hovie, User and Vivid. You
can adjust the picture mode based upon your personal preference.
Selectsound modes
Press the [ SOUND] button to select sound modes from Standard, Speech, User, and Husic.
Select screen modes
Press the [ASPECT] button to select the aspect ratio between picture width and picture height (High Definition 16:9
pictures will be displayed in original format 16:9, named Wide).The options for SD (Standard Definition 4,:3) are
Normal, Wide, Zoom and Cinema°
13
To Next Page
Loading...
