Why is there picture only but no audio on my ProScan PLDED3996A LED TV?
If you see a picture but hear no audio on your ProScan LED TV, first, make sure the audio cable is securely connected. Second, try readjusting the volume using the remote control. Also, ensure that the TV’s tuner signal is not lower than 65 %.
Why is there no picture on my ProScan PLDED3996A?
If your ProScan LED TV shows no picture, ensure the power cord is correctly connected and the power is turned on. Also, verify that the video cable is properly connected and that you've selected the correct input signal source using the source button.
Alerts users about electrical hazards and the importance of professional servicing.
Advises on precautions to prevent fire, electrical shock, and damage from liquids or heat.
Warns against physical damage, instability, and electrical hazards during non-use.
Explains the necessity and method of grounding external antennas for surge protection.
Recommends unplugging the TV and antenna during lightning storms for protection.
Advises on safe placement of the antenna away from overhead power lines.
Provides a detailed explanation of the functions of all buttons on the remote control.
Guides users through adjusting picture settings like brightness, contrast, color, and sharpness.
Explains how to adjust picture settings such as aspect ratio, noise reduction, and dynamic contrast.
Details how to adjust sound settings including equalizer, MTS, and audio output options.
Provides additional information on adjusting sound settings like MTS and audio language.
A comprehensive guide to common TV problems and their solutions.
Continues troubleshooting common issues like blocked channels, slow power, and picture anomalies.
Addresses issues related to volume, picture quality, aspect ratio, remote buttons, and power saving.
General| Screen Size | 39 inches |
|---|---|
| Display Type | LED |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Inputs | HDMI, USB |
To Next Page
