How to fix HDCP video with no audio on ProScan PLED2435A?
If your HDCP video has no audio on your ProScan LED TV, ensure that you have a 3.5 mm mini-jack cable connected from your HDCP video device's sound output to the TV's VGA STEREO INPUT. If your HDCP video device uses RCA AUDIO jacks, you’ll need to obtain an RCA audio converted into a 3.5 mm mini-jack cable.
Why is my ProScan PLED2435A LED TV remote control not working?
If your ProScan LED TV remote control isn't working, turn off the TV and unplug it. Remove the batteries from the remote for 30 minutes. Press the remote buttons and the power button randomly for about 2 seconds, then reinstall the batteries. Check if there is a clear line of sight between the remote control's front sensor and the TV's remote sensor.
How to get sound on PC from ProScan LED TV?
If you're not getting any sound on your PC connected to the ProScan LED TV, make sure you have a 3.5 mm mini-jack cable connected from your PC's sound output to the TV's VGA STEREO INPUT.
Why is the picture distorted on my ProScan PLED2435A LED TV?
If the picture on your ProScan LED TV is distorted or has abnormal sound, it might be due to interference from large electrical appliances, cars, motorcycles, or fluorescent lights. If the TV is close to the wall, try moving it to another room to see if the problem persists.
How to fix no color on ProScan PLED2435A?
If you're experiencing no color on your ProScan LED TV, adjust your picture setup and ensure that the saturation and RGB settings are not turned all the way down. Also, check your signal.
How to brighten picture on ProScan PLED2435A?
If your ProScan LED TV picture is too dark, adjust the contrast, brightness, and lamp settings from the OSD Menu.
What to do if ProScan LED TV cannot receive sufficient channels?
If you cannot receive sufficient channels through the ATSC/NTSC tuner on your ProScan LED TV, change the direction of your antenna and rescan your channels. If you have cable, contact your cable company and inquire about the signal strength of your local cable.
How to fix abnormal colors on ProScan LED TV?
To fix abnormal colors on your ProScan LED TV, match the colors on the cables to the ports on the back of the television. For example, connect the red cable to the red-colored port.
Why does my ProScan LED TV have picture but no audio?
If your ProScan LED TV shows picture but no audio, ensure that the audio cable is connected correctly. Readjust the volume using the remote control. Also, the TV’s tuner signal must not be lower than 65 %.
What to do if ProScan PLED2435A has audio only no picture?
If your ProScan LED TV displays audio but no picture, ensure that both your video and audio cables are connected properly. Also, the TV’s tuner signal must not be lower than 65 %.
Essential safety guidelines for installation, operation, and maintenance of the TV.
Explanation of all buttons and their functions on the remote.
Lists main OSD sections: Picture, Sound, Channel, Parental, Setup, Others.
Adjusts picture mode, brightness, contrast, color, and tint.
Adjusts sound mode, bass, treble, balance, surround sound, and equalizer.
Features for channel list, favorite channels, channel setting, and auto channel search.
Troubleshooting guide for common issues like no picture, sound problems, or remote not working.
General| Screen Size | 24 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Type | LED |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Contrast Ratio | 1000:1 |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Inputs | HDMI, USB |
| Sound Output | 10W (2 x 5W) |
To Next Page
