Using Your TV and Remote
With a Cable Box: Setting the Cable Channel
The Cable Channel works with DSSeCABLE on the remote. If the Cable
Channel is set, pressing DSS°CABLE selects the channel to see cable chan-
nels. The Cable Channel setting depends on which channel your cable box
must be on to see cable channels. The channels usually used are 02, 03, 04,
05 or 06. Consult your cable company for more information.
1. Select the Setup menu
Controls Alarm Ad
13
A. PressTV to set the remote to
control the TV.
B. PressMENU°PROG to select the
Setup menu. This menu is white.
2. Highlight Cable Channel
Controls Alarm Ad
13
A. Press MOVE • (down) to move
down the menu until Cable
Channel is highlighted.
B. Press b"to underline the
channel.
3. Enter channel number
Controls Alarm Ad
13
A. Enter the number for your cable
box, either 02, 03, 04, 05, or 06.
Press CHANNEL down until
"Disabled" is displayed to turn
this feature off.
13
To Next Page
Loading...