EasyManua.ls Logo

ProStart CT-5072 Installation Guide

Default Icon
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Notice
The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of
the product, be that either damage to the vehicle itself or to the unit. This unit must be installed by a certified
technician using all safety devices supplied. Please note that this guide has been written for properly trained
technicians: a certain level of skills and knowledge is therefore assumed. Please review the Installation Guide
carefully before beginning any work.
Warning
Before installing the unit, if installing on a vehicle with a manual transmission, test that the OEM Door Switch
contacts of the vehicle work well, and that the Parking Brake system operates properly. If installing on a vehicle
with an automatic transmission, test that the vehicle does not start when the gearshift lever is in the “Drive”
position. If it starts in gear, install a manual transmission remote starter system instead.
Doc#: 121105 Rev: 2.3 © 2012 CT- 5072 -CP- Canada
ONE-WAY AUTOMATIC/MANUAL TRANSMISSION
REMOTE STARTER WITH FULL ALARM SYSTEM
AND VIRTUAL TACH SYSTEM
(AS PRG-1000 COMPATIBLE)
CT-5072
Installation Guide

Other manuals for ProStart CT-5072

Question and Answer IconNeed help?

Do you have a question about the ProStart CT-5072 and is the answer not in the manual?

ProStart CT-5072 Specifications

General IconGeneral
BrandProStart
ModelCT-5072
CategoryRemote Starter
LanguageEnglish

Related product manuals