EasyManua.ls Logo

ProStart CT-3371 User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not more than that required for successful
communication.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the
equipment.
Doc#: 110608 Rev: 1.3 © 2011 CT-3371 -FcN- Canada
4BUTTON
AUTOMATIC/MANUALTRANSMISSION
REMOTESTARTER
CT-3371
User Guide
WARNING !
It is the responsibility of the vehicle operator to ensure that their
vehicle is parked in a safe and responsible manner.
1. a) Manual transmission
: When leaving the vehicle, it is the user’s
responsibility to ensure that the gearshift lever is in the NEUTRAL
position and the parking brake is engaged in order to avoid accidents
upon remote starting.
b) Automatic transmission
: When leaving the vehicle, it is the user’s
responsibility to ensure that the gearshift lever is in “Park” in order to
avoid accidents upon remote starting.
(Note: Make sure that the automatic vehicle cannot start in "Drive".)
2. It is the user's responsibility to ensure that the remote starter is
disabled or put into valet mode before servicing.

Other manuals for ProStart CT-3371

Question and Answer IconNeed help?

Do you have a question about the ProStart CT-3371 and is the answer not in the manual?

ProStart CT-3371 Specifications

General IconGeneral
Number of Buttons5
Engine StartYes
Installation RequiredYes, professional installation recommended
Transmitter2-Way LCD
FeaturesKeyless entry, trunk release
ConfirmationAudible and visual feedback

Summary

Safety and Operational Guidelines

Vehicle Preparation for Remote Start

User responsibility for safe parking and transmission/brake engagement.

Servicing and Valet Mode

Ensure disablement or valet mode usage prior to vehicle servicing.

Industry Canada Regulatory Notice

Compliance with interference and power limits for radio frequency devices.

System Overview and Remote Control

Introduction to ProStart

Overview of the remote car starter system with advanced features.

SmartStart™ Functionality

Smartphone integration for remote starter features.

Remote Transmitter Operations

Functions of the 4-button remote control for various operations.

Remote Starting Procedures

Setting Vehicle into Ready Mode

Essential procedure for manual transmission vehicles before remote starting.

Ready Mode Activation Methods

Steps to enable Ready Mode via remote or handbrake.

Operating the Remote Starter

Remote Engine Start and Stop

How to start and stop the vehicle engine using the remote.

Driving Off After Remote Start

Procedure to disarm starter kill and prepare for driving.

Starter Kill Arming and Disarming

How the starter kill feature is activated and deactivated.

Remote Starter Features

Remote Door Locks and Trunk Release

Using the remote for keyless entry and trunk access.

Idle Mode Operation

Keeping the engine running while vehicle is unattended.

Idle Mode for Manual Transmission

Specific steps for activating Idle Mode in manual transmission vehicles.

System Modes and Emergency Features

Valet Mode Functions

Disables remote starter functions for servicing or parking indoors.

Panic Mode Activation and Control

How to activate and stop panic mode in emergency situations.

Quick Lockout™ Security

Instantaneous door locking during emergency situations.

Specialized Operating Modes

Cold Weather Mode

Automatic engine starting at intervals for cold weather operation.

LED Flashing Control

How to disable or enable LED flashing indicators on the unit.

Constant Output Functions

Using buttons for continuous output pulses for window control or other features.

Advanced Installation Features

Ignition-Controlled Door Locks

Automatic door locking/unlocking based on ignition and brake pedal status.

Secure Lock System

Enhances security by re-locking doors after remote start.

Programmable Engine Run Times

Configurable engine run durations for gas and diesel engines.

Turbo Mode Operation

Allows turbocharger to idle down safely after vehicle shutdown.

Auxiliary Outputs and Multi-Car Control

AUX 1 and Priority Door Features

Details on Aux 1 output and driver-priority door unlock.

Multi-Car Operation with Single Remote

Controlling two vehicles with one remote transmitter.

Troubleshooting Range Issues

Factors affecting and improving remote control transmitting range.

Diagnostic Information

Parking Light Flash Codes

Table explaining the meaning of various parking light flash patterns for diagnostics.

ProStart Limited Lifetime Warranty

Warranty Coverage and Period

Details warranty duration for remote starters and accessories.

Warranty Void and Exclusion Clauses

Conditions that void the warranty and items not covered.

Related product manuals