EasyManua.ls Logo

ProStart CT-3271 User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the
device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (EIRP) is not more than that required for successful
communication.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
Doc#: 110530 Rev: 1.3 © 2011 CT-3271 -FcN- Canada
MANUAL/AUTOMATICTRANSMISSIONMULTI‐CHANNEL
REMOTESTARTERSYSTEM
CT-3271
User Guide
WARNING!
It is the responsibility of the vehicle operator to ensure their
vehicle is parked in a safe and responsible manner.
1. a) Manual transmission: When leaving the vehicle, it is the user’s
responsibility to ensure that the gearshift lever is in the NEUTRAL
position and the parking brake is engaged in order to avoid accidents
upon remote starting.
b) Automatic transmission: When leaving the vehicle, it is the
user’s responsibility to ensure that the gearshift lever is in “Park” in
order to avoid accidents upon remote starting.
(Note: Make sure that the automatic vehicle cannot start in "Drive".)
2. It is the user's responsibility to ensure that the remote starter is
disabled or put into valet mode before servicing.

Other manuals for ProStart CT-3271

Question and Answer IconNeed help?

Do you have a question about the ProStart CT-3271 and is the answer not in the manual?

ProStart CT-3271 Specifications

General IconGeneral
BrandProStart
ModelCT-3271
CategoryRemote Starter
LanguageEnglish

Summary

Using the Remote Control

Default Remote Functions

Basic button functions for the remote control.

Remote-Starting Your Vehicle

Setting Vehicle to Ready Mode

Procedure to prepare the vehicle for remote start.

Initiating Remote Start

How to start the vehicle engine using the remote.

Driving Off

Starter Kill and Anti-Grind Feature

Arming and Disarming Starter Kill

Methods to activate and deactivate the starter kill security feature.

Passive Mode Operation

Automatic arming of the starter kill system after ignition off.

Active Mode Operation

Manual arming of the starter kill system via transmitter.

Remote Starter Features

Advanced Features: Installation-Programmable Options

Poor Transmitting Range Issues

Related product manuals