P. 12 User Guide
Using the Remote Control
Transmitter may not be exactly as shown.
The transmitter offers several command-confirmation and timer features. This section explains some of the key
transmitter functions that are available. The following section gives a summary of the button combinations used
to access those functions.
Note:
If you wish to exit a function while still in the process of accessing it, simply stop and wait for at
least 10 seconds: the transmitter will return to its normal state.
LCD Transmitter Operation (
First Car Control
)
Basic Vehicle Operation
FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS /DESCRIPTION
LOCK 1 Beep
Locks the doors
and arms the Starter Kill (if
installed) and the alarm.
UNLOCK 2 Beep
Unlocks the doors and disarms
the Starter Kill (if installed) and
the alarm.
TRUNK or AUX 3 1 Beep Trunk output
START *
(see Runtime
Options below)
+
1 beep before
engine starts
followed by melody
when started
Starts the engine
STOP None Melody Stops the engine
Light ON ON for 5 seconds
Press the
button once.
To Next Page
Loading...
