EasyManua.ls Logo

ProSun Luxura V7 - User Manual

ProSun Luxura V7
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
08_13_013_ProSun Ver:01
Owner’s manual 10 Minutes
10 MINUTES

Questions and Answers

  • K
    Kenneth SuttonAug 6, 2025
    How to fix individual lamps that do not light in ProSun Luxura V7 Tanning Beds?
    • R
      Roberta HoltAug 7, 2025
      If individual lamps in your ProSun Tanning Bed do not light, ensure each lamp is properly secured in its socket by turning it until it illuminates. If it still doesn't light, try replacing the lamp or the starter.
  • J
    John JenningsAug 12, 2025
    What to do if the facial tanner does not light on my ProSun Luxura V7 Tanning Beds?
    • D
      Diane RodriguezAug 12, 2025
      If the facial tanner on your ProSun Tanning Bed doesn't light, first ensure the face tanner switch is in the “On” position. If it still doesn’t work, the lamp may be defective and need replacement. Also, avoid rapidly switching the facial tanner “On” and “Off”; allow approximately 3 minutes for cool down before switching it back on.
  • T
    Timothy ThomasAug 19, 2025
    Why does my ProSun Luxura V7 appear to be too hot?
    • J
      James VelazquezAug 19, 2025
      If your ProSun Tanning Bed appears too hot, the fans might be obstructed. Make sure all fans are free from obstructions and dust.
  • K
    knguyenAug 25, 2025
    Why is the unit temperature abnormally warm in my ProSun Tanning Beds?
    • M
      Marc EvansAug 26, 2025
      If your ProSun Tanning Bed unit temperature is abnormally warm, it might be too close to the wall. Pull the bed away from the wall at least 6 – 12 inches.
  • S
    Scott GrayAug 31, 2025
    What to do if my ProSun Luxura V7 unit is activated but nothing happens?
    • J
      Jonathon WilliamsAug 31, 2025
      If your ProSun Tanning Bed is activated but nothing happens, check that the power source is properly connected. If the timer clears after priming, restart it and try again. Also, check the remote connections.

Summary

Safety Guidelines

Critical Safety Warnings

Essential safety instructions including reading the manual, using protective eyewear, and avoiding overexposure.

Product Precautions

Lamp Compatibility and Eye Protection

Details on compatible lamps, mandatory protective eyewear, and risks of UV exposure.

Technical Data

Important Operating Notices

Crucial operational guidelines regarding ambient temperature, ventilation, and servicing.

Getting Started

Essential Reading Before Use

Key information and warnings to review before operating the tanning unit.

Sensible Tanning Practices

Golden Rules for Tanning

Ten fundamental rules for safe and responsible tanning sessions.

Electrical Installation

General Electrical Requirements

Compliance with electrical codes, wiring standards, and contractor responsibilities.

Understanding Tanning

The Science of Tanning

Explanation of UV rays (UVA, UVB, UVC) and their effects on skin tanning.

The Tanning Process

Responsible Tanning Guide

A guide to responsible tanning, including session frequency and avoiding adverse reactions.

Care and Maintenance

General Care and Precautions

Guidelines for safe operation, cleaning, and avoiding damage to the tanning unit.

Frequently Asked Questions

Answers to common user questions regarding tanning distance, protection, and pregnancy.

Preventive Maintenance Schedule

Maintenance Task Frequencies

A schedule detailing tasks like cleaning, inspection, and replacement with their frequencies.

Maintenance Details

Cleaning the Tanning Unit

Instructions for cleaning the machine, including acrylics and internal parts.

Acrylic Sheet and Lamp Longevity

Information on recommended replacement intervals for acrylic sheets and lamps.

Component Replacement

Removing Acrylic Sheets

Step-by-step instructions for safely removing the acrylic sheets from the tanning bed.

Replacing Lamps and Starters

Procedures for replacing tanning lamps, starters, and facial tanning lamps.

Troubleshooting Guide

Common Problems and Solutions

A list of common issues, their probable causes, and suggested solutions for the tanning unit.

Warranty Information

Warranty Coverage and Exclusions

Information on the warranty period, what is covered, and common exclusions.

Operating the Tanning Unit

General Operation Settings

How to adjust tanning time and select operating modes using timers or coin boxes.

Using External Timers or Coin Boxes

Instructions for operating the machine with external timers or coin-operated systems.

Tanning Unit Operation

Operation Without External Timer

How to operate the unit using its internal timer and control functions.

Control Functions and Cooling

Details on controlling body cooling and other operational features.

Operation and Monitoring

Understanding Error Messages

Explains error codes displayed on the unit and necessary actions.

Reading Operating Counters

How to read and interpret the operating hours counters for lamps and the entire machine.

Symbols and Labels

Identification of Warning Symbols

Explains various warning symbols and their meanings related to safety and operation.

Product Dimensions

Physical Dimensions and Measurements

Provides detailed measurements and diagrams of the tanning unit's physical size.

Component Removal

Procedure for Acrylic Removal

Step-by-step visual guide for safely removing the acrylic sheets.

Component Replacement

Procedure for Lamp Replacement

Visual instructions for the safe and correct replacement of tanning lamps.

Assembly Instructions

Steps for Unit Assembly

Introduces the assembly process for the tanning unit.

Unit Adjustment

Door Alignment Procedure

Visual guide on how to adjust the doors for proper alignment and function.

Electrical Diagrams

Power Cable Connections

Diagram showing the labeling of power cable wires (L1, L2, L3, PE).

Controller Connections

Connecting the Tmax Controller

Wiring diagram and instructions for connecting the Tmax controller with quickstart.

Electrical Code Approval

ETLus and ETLc Approval Status

Confirmation of ETL approval and reference to local electrical code authorities.

FDA Compliance

FDA Performance Standards

Statement of conformity with FDA performance standards for sun lamp products.

ProSun Luxura V7 Specifications

General IconGeneral
BrandProSun
ModelLuxura V7
CategoryTanning Beds
LanguageEnglish

Related product manuals