ProSun RenuvaSkin L3200

Questions and Answers

C
Christine DavisAug 10, 2025
What to do if my ProSun RenuvaSkin L3200 Tanning Beds unit is activated but nothing happens?
- M
  Michelle HammondAug 10, 2025
  If your ProSun Tanning Beds unit activates but nothing occurs, first ensure the unit is properly connected to a power source. If the timer clears after priming, restart it and try again. For remote timers that aren't working, check that they are plugged in. Also, have a certified technician check the voltage if you suspect it's incorrect. For replacement parts contact ProSun customer service.
S
shelby86Aug 15, 2025
Why is my ProSun RenuvaSkin L3200 unit too hot?
- L
  lowerobertAug 15, 2025
  If your ProSun Tanning Beds unit seems too hot, make sure that the fans are free from obstructions and dust. Also, verify that the room size meets the requirements specified in the manual.
A
Amanda GonzalezAug 19, 2025
What to do if individual lamps do not light in ProSun RenuvaSkin L3200?
- C
  Christopher HernandezAug 20, 2025
  If individual lamps in your ProSun Tanning Beds unit aren't lighting up, try the following: * Ensure the lamps are correctly seated in their sockets by turning each lamp until it illuminates. * Replace any defective lamps or starters. * Have a certified technician replace any defective ballasts or reconnect any loose wires. Also, check if the lamp lifecycle has ended.
L
Luke MullinsAug 26, 2025
Why is the room temperature abnormally warm when using ProSun RenuvaSkin L3200 Tanning Beds?
- D
  davidgarciaAug 26, 2025
  If the room temperature becomes abnormally warm when using your ProSun Tanning Beds unit, the unit might be too close to the wall. Pull the unit away from the wall, ensuring there's at least 10-12 inches of space.
M
Mary WilliamsAug 29, 2025
What to do if my ProSun Tanning Beds canopy does not stay open?
- J
  James WrightAug 29, 2025
  If the canopy of your ProSun Tanning Beds unit doesn't stay open, the shocks may be damaged. Check that the shocks are installed according to the assembly instructions in the manual. Contact ProSun customer service for replacement parts if needed.
C
Craig ValdezSep 3, 2025
What to do if the acrylic is cracked in my ProSun Tanning Beds?
- C
  Collin WilliamsSep 3, 2025
  If the acrylic in your ProSun Tanning Beds unit is cracked due to damage from user actions or cleaning, contact ProSun for a replacement. A non-skilled person can replace the acrylic.