ProSun Luxura X3 User Manual (English)

Questions and Answers:

P
Patrick RichardAug 3, 2025
What to do if individual lamps do not light in my ProSun Luxura X3 Tanning Beds?
- R
  richard13Aug 3, 2025
  If individual lamps in your ProSun Tanning Beds unit aren't lighting, try the following: * Ensure lamps are correctly placed in their sockets by turning the lamp in the socket until it illuminates. * Replace any lamps or starters that may be defective. * Have a certified technician replace any defective ballasts or reconnect any loose wires. Also consider that the lamp lifecycle may have ended.
J
josephmichaelAug 7, 2025
What to do if my ProSun Tanning Beds unit is activated but nothing happens?
- J
  Jennifer RiveraAug 7, 2025
  If your ProSun Tanning Beds unit activates but nothing occurs, check the power connection to ensure the unit is properly plugged in. If using a timer, restart it. For remote timers, verify they are correctly connected. Also, have a certified technician check the voltage. If the remote timer still doesn’t work, contact ProSun customer service for replacement parts.
D
dsanfordAug 11, 2025
Why is my ProSun Luxura X3 Tanning Beds unit so hot?
- V
  Valerie OrtizAug 11, 2025
  If your ProSun Tanning Beds unit seems too hot, ensure the fans are free from obstructions and dust. Also, verify that the room size meets the requirements specified in the manual.
T
Todd HernandezAug 16, 2025
What to do if the facial tanner does not light on my ProSun Luxura X3?
- T
  Thomas HarrisonAug 16, 2025
  If the facial tanner on your ProSun Tanning Beds unit isn't lighting, first ensure the face tanner switch is in the “On” position and power cycle the unit. If the lamp is defective, replace it. Also, allow a few minutes (approximately 3 minutes) of cool-down time before switching the facial tanner back “On” after it has been turned off.
J
Jason RandallAug 20, 2025
Why is the room temperature abnormally warm when using ProSun Tanning Beds?
- M
  Mitchell DrakeAug 20, 2025
  If the room temperature becomes abnormally warm when using your ProSun Tanning Beds unit, pull the unit away from the wall at least 10-12 inches.