EasyManua.ls Logo

ProTeam P15 - Distance from the Pool

ProTeam P15
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
- In case of any abnormality with the heat pump, cut off the power immediately and
contact a professional technician;
- It is strongly advised to place a protective guard around the unit to keep children away
from the heat pump.
1.4 Distance from the pool
Normally, the heat pump is installed within a 7.5m radius of the pool. The greater the distance
from the pool, the greater will be the heat loss from the piping. Since the piping is buried for
the most part, heat loss is minimal for distances up to 15m between pump and pool (total to
and from pump: 15m x 2 = 30m), unless the soil is wet or the water level is high. Heat loss per
30 metres could roughly be estimated at 0.6kw-hour (2000BTU) for every 5°C temperature
difference between the pool water and the soil surrounding the pipe, which translates into an
increase in operating time of 3-5%.

Table of Contents

Related product manuals