Need help?Do you have a question about the Protimeter Aquant BLD5765 and is the answer not in the manual?
General| Model | Aquant BLD5765 |
|---|---|
| Type | Moisture Meter |
| Measurement Range (relative) | 0 to 100 |
| Resolution | 0.1 |
| Depth of Measurement | Up to 19mm (3/4 inch) |
| Display | LCD |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Battery Type | 9V |
Accuracy specifications are valid for one year; recalibration is required afterward.
Operate the instrument properly for its intended purpose and within specified parameters.
The non-invasive mode gives relative readings up to 19mm/3/4" beneath the surface.
Ideal for rapid surveys of solid walls and floors to pinpoint areas of concern.
Used when electrode pins are impractical or undesirable, like behind tiles or wallpaper.
Surface moisture has little effect; conductors within material may cause high readings.
Measure until stable, then press and hold the play button for 2 seconds to store the reading.
Shows if material is above or below the original reference reading.
Press the ON/OFF button; the LCD displays all segments and sweeps the LED bar graph.
Numeric measurement and color LED (DRY, AT RISK, WET) based on the measurement shown.
DRY (70-169 Green), AT RISK (170-199 Yellow), WET (200-999 Red).
Press and hold the play button, then press ON/OFF button until the version number displays.
Set whether the DRY, AT RISK, WET indication on the display needs to be switched ON or OFF.
Turns the Buzzer ON or OFF. Use play button to change; ON/OFF button to save.
Turns the Backlight ON or OFF. Use play button to change; ON/OFF button to save.
Set automatic shutdown time between 1 and 6 minutes, or disable it.
A symbol on the screen indicates the battery is low and needs replacement soon.
Press the ON/OFF button during measurement to freeze the reading and display 'HOLD'.
Instructions for removing the battery lid, replacing the battery, and ensuring correct polarity.
Temperature range: 0°C to 50°C. Humidity: 0 to 90% RH, non-condensing.
Non-invasive, up to 3/4" (19mm) deep. Readings: 70 to 999.
Includes power source, size, weight, buzzer details, and regulatory compliance.
To Next Page
