Need help?Do you have a question about the Protimeter MMS3 and is the answer not in the manual?
General| Type | Moisture Meter |
|---|---|
| Display | LCD |
| Power Supply | 9V battery |
| Measurement Range (Wood Moisture Content) | 6% to 99% WME |
| Measurement Range (Relative Humidity) | 0% to 100% RH |
| Accuracy (Relative Humidity) | ±2% RH |
| Weight | 340 g |
| Dimensions | 190 mm x 100 mm x 40 mm |
| Operating Temperature Range | 0°C to 40°C |
| Temperature Range | -20 to 60 °C |
| Accuracy (Temperature) | ±0.5°C |
Safety notes for the sharp WME pins.
Notes on IR mode accuracy outside its range.
Critical safety rules for using the laser pointer feature.
Procedure for powering the device on, off, and auto-off.
Guide to selecting and using the pin moisture meter mode.
Instructions for using deep wall probes in measure mode.
Guide to selecting and using the pinless moisture meter mode.
Assessing condensation risk using surface temperature.
Overview of manual and continuous data logging options.
Steps for calibrating the device and verifying accuracy.
Setting parameters for continuous data logging.
How the MMS3 indicates low battery and its behavior.
List of detected system errors and their descriptions.
Three key criteria for diagnosing dampness in buildings.
Specifications for pin and non-invasive moisture measurements.
To Next Page
