Before getting started, the batteries should be installed
in the compartment.
Functions of Keys
1. Power :
a) Press to turn ON the device.
b) Press and hold / long press to turn OFF
the device.
c) Press to select from the menu.
2. UP / Increment :
a) Navigate up through menu.
b) Increment the number in configuration.
3. DOWN / Decrement :
a) Navigate down through menu.
b) Decrement the number in configuration.
4. Ref/ Right/ Record/ Hold :
a. Press to hold and release reading while
in measurement.
b. Press to record value while in
measurement.
c. Press and hold to get in to reference
mode while in measurement as well as to
exit from the reference mode.
d. Press to move through selection while in
configuration menu.
5. Back :
a) Press to navigate back to previous
screen. When pressed while in
measurement, screen is navigated to
Menu.
Notes: -
1. If the unit is being stored in shelf for a long time, it
is better to remove batteries.
2. For better backup and expected battery life,
replace with recommended batteries.
To Next Page
Loading...
