RH, Ta, Ts and WME calibration fault
7. Diagnostic Procedure Guidelines
MMS3 indicates that the battery is low by blinking the
battery level indicator in the right corner of the display
header.
MMS3 restricts high power operations during low battery
condition to avoid any system misbehaviour and the
user will be alerted.
Any configuration and/or calibration changes made
during this time will be temporary and will not be saved
in the memory.
Logging is restricted/stopped when the battery is low.
Note: It is recommended to replace the batteries once the
battery indicator starts blinking.
For better backup and expected battery life, replace with
recommended batteries.
5. System behaviour during low battery
MMS3 will detect the system errors and display the
respective error codes (indicated in Red) in a loop on
the screen header as shown below.
To Next Page
Loading...
