Protimeter MMS3 User Manual

INS9800
16
MMS3 Instruction Manual
Navigate to SELECT MODE -> SETTINGS -> DATE
AND TIME and press to change the device date and
time. Use to navigate to the required field. Then, use
/ to increment / decrement the value in that
box. After entering the required date and time press
to save values entered. The new date and time are
displayed at the top left corner of the screen. Date and
time can also be set up by connecting to a PC and using
the optional logging software or through the App when
connected.
DATE AND TIME
78%
17 FEB 21
09:58
MONTH
YEAR
DAY HR24
MIN
SEC
1 7
0 2
2 1
1 0
0 7
1 3
DATE AND TIME
78%
17 FEB 21
09:58
MONTH
YEAR
DAY HR24
MIN
SEC
1 7
0 2
2 1
1 0
0 7
1 3
DATE AND TIME
78%
17 FEB 21
09:58
MONTH
YEAR
DAY HR24
MIN
SEC
1 8
0 2
2 1
1 0
0 7
1 3
4.7g Auto off
The MMS3 will switch OFF automatically after auto
switch off time if no activity/key press is observed.
Navigate to SELECT MODE -> SETTINGS -> AUTO
OFF and press to configure the Auto off time. Use
/ to navigate between 0 to 10 minutes and
press to set the Auto off time (2 mins is the default
value). To disable the Auto off feature, set the Auto
switch off time to 0.
Note: During continuous logging operation, auto switch off
time is considered to be the display
turnoff time.
User will see an alert 10 seconds before the unit is about to
auto turn off.
Auto turn off will become inactive while the Bluetooth is on.
SETTINGS
78%
17 FEB 21
09:58
AUTO OFF
BRIGHTNESS
BUZZER
AUTO OFF
78%
17 FEB 21
09:58
MINS 4

Protimeter MMS3 Specifications

General

Brand	Protimeter
Model	MMS3
Category	Measuring Instruments
Language	English