Protimeter MMS Plus User Manual

Moisture Measurement System
Instruction Manual
Protimeter MMS, Protimeter MMS Plus
®

Protimeter MMS Plus Specifications

General

Humidity Measurement Range	0% to 100% RH
Warranty	2 years
Display	LCD
Operating Temperature Range	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Accuracy	±2%
Resolution	0.1%
Battery Type	9V
Probe Type	Pin and non-invasive
Moisture Measurement Range (Non-Invasive)	0 to 100% relative moisture content

Summary

1.1 Switching the MMS On and Off

2.0 Moisture Meter Modes

2.1 Search Mode - Selection and Use

Guides on how to select and use the Search mode for qualitative moisture detection.

2.2.0 Measure Mode - Selection and Use

2.2.1 Using Auxiliary Moisture Probes in Measure Mode

Details the use of Deep Wall Probes and Hammer Electrodes in Measure mode for sub-surface readings.

3. Hygrometer Mode - Selection and Use

4. Condensator Mode

5. Setup Mode

6. Holding and Logging Mode

7.0 Diagnostic Procedure Guidelines

8.0 Calibration Checking

9. Care and Maintenance

APPENDIX 1: Guidance Notes for Measuring Moisture in Floors

1 Rapid Moisture Level Assessment of Solid Floors

Using Search Mode for initial assessment of moisture levels in solid floor slabs.