Protimeter MMS3 User Manual

INS9800
20
MMS3 Instruction Manual
4.7m USB communication.
The highlighted number can be changed by pressing
/ . Pressing will take the cursor to the next
number which will be highlighted and then can be
changed. Once all the numbers are set as per need
press to start the logging.
• Start After: minutes after which logging should start (0
to 999).
• Sampling Interval: sampling interval in minutes (1 to
60).
• End After: minutes after which logging should stop
after sampling begins (1 to 999).
• Job Number: 1 to 255
SETTINGS
78%
17 FEB 21
09:58
AUTO OFF
BRIGHTNESS
BUZZER
CALIBRATION
LOGGING
USB CONNECTION
LOG SETUP
78%
17 FEB 21
09:58
LOG INTERVAL
STOP AFTER
START AFTER MINS
0 0
GL?� KRJ ?BO
1
MINS
0 1
MINS
0 0 1
0 0 1
PRESS RIGHT TO SELECT NEXT DIGIT
LOGGING
78%
17 FEB 21
09:58
SETUP
CLEAR DATA
4.7l Clear logged data.
MMS3 has an option to erase the logged data in the
device. Navigate to SELECT MODE -> SETTINGS ->
LOGGING -> CLEAR DATA and press . Then it will
display confirmation message asking for erasing data.
Select Yes and press to erase the data.
SETTINGS
78%
17 FEB 21
09:58
AUTO OFF
BRIGHTNESS
BUZZER
CALIBRATION
LOGGING
USB CONNECTION
LOGGING
78%
17 FEB 21
09:58
SETUP
CLEAR DATA

Protimeter MMS3 Specifications

General

Brand	Protimeter
Model	MMS3
Category	Measuring Instruments
Language	English