Protimeter MMS3 - Default Chapter; Table of Contents

INS9800
1. Introduction 1
2. Safety Considerations 1
3. Product Components and accessories 2
3.1. Switching the MMS3 On and Off 3
4. MMS3 Modes 4
4.1. Pin moisture meter-selection and use 4
4.1a Using auxiliary deep wall moisture probes in
measure mode 5
4.1b Detecting hygroscopic salts 6
4.2. Pinless moisture meter – selection and use 6
4.3. Hygrometer – selection and use 8
4.4. Psychrometric – Selection and use 9
4.4a Dew Point 10
4.4b Grains per pound/ grams per kilogram 10
4.4c Enthalpy 10
4.4d Vapor pressure 10
4.5 Condensator mode 11
4.5a Surface temperature probe (contact based)
Selection and use 11
4.5b Surface temperature IR (non-contact based)
selection and use 11
4.6 Logging – selection and use 12
4.6a Manual logging 12
4.6b continuous logging 12
4.7 Settings – selection and use 13
4.7a Language 13
4.7b Bluetooth 14
4.7c Set unit 14
4.7d Custom 15
4.7e Sensitivity mode 15
4.7f Date and time 16
4.7g Auto off 16
4.7h Set Brightness 17
4.7i Buzzer on/off 18
4.7j Calibration 18
4.7k Set logging parameters 19
4.7l Clear logged data 20
Contents