The Protimeter MMS3 is a precision-built electronic
instrument that will provide many years of reliable
service if the following points are observed:
• When not in use, keep the MMS3 instrument and its
accessories in the factory carry case. Store the case in
a stable, dust-free environment and keep it out of direct
sunlight.
• If the instrument is to be stored for more than four
weeks or if the low battery power symbol appears on the
display, remove the batteries from the instrument.
• When using the MMS3 in Search mode, do not slide
the bulge across surfaces, as this may lead to rapid
instrument case wear. The instrument should be lifted
and placed in position to prevent such wear.
• Check the condition of the MMS3 accessories on a
regular basis and replace them if they become worn or
damaged.
• To preserve their calibration characteristics, Hygrostick
probes should not be exposed to saturated
environments. If this is unavoidable, Hygrostick probes
should be replaced on a regular basis and their
calibration should be checked frequently.
9. Technical specifications
To Next Page
Loading...
Need help?
General
