Proton ECOMATIC PRO User Manual

RUEN
33
Take o the baseplate from the controller.
7. INSTALLATION
7.1 Wall mounting
Disconnect the programmable controller from power
supply before installation. The controller is to be
installed at the height of 1.5 m in a place with proper
air circulation, far from sources of heat and cold, avoid
direct sun rays.
WARNING!
1
Fix the baseplate using screwdriver on wall.
2
Insert and clip the display unit on baseplate.
3
2
1
3

Proton ECOMATIC PRO Specifications

General

Brand	Proton
Model	ECOMATIC PRO
Category	Controller
Language	English