* If
fitted
Instrument Panel Switch Block
1. Electronic Stability Control (ESC) switch
2. Backlight brightness adjustment knob
3.
Headlamp levelling adjustment knob
The headlamp levelling adjustment knob has four positions: 0, 1, 2 and 3.
Please set the position of knob as per the load condition:
0:
Only the driver seat is occupied.
1: Only the driver seat and the front passenger seat are occupied.
2: All seats are occupied, and the boot is under full load.
3: Only the driver seat is occupied, and the boot is under full load.
17
To Next Page
Loading...