* If
fitted
In this way, the vehicle will not
apply the automatic electric
parking brake.
AUTO HOLD
AUTO HOLD switch
S
tart the engine, close the driver
door, fasten the seat belt, and
press the AUTO HOLD switch.
T
he AUTO HOLD function will
be enabled and the switch
indicator will illuminate.
Electronic Stability
Control (ESC)
ESC Off
Press and hold the switch
located on the switch pack of the
instrument panel.
The ESC will turn off, and the
ESC off indicator on the meter
instrument will illuminate.
ESC On
When the ESC function is
deactivated, press the switch
again to activate the system
again. The ESC off indicator on
the meter instrument will go off.
E
SC function will be activated
automatically when the vehicle
speed is ≥ 85 km/h.
24
To Next Page
Loading...