Proxim ORiNOCO AP-4000 - Page 111

Advanced Configuration AP-4000/4000M/4900M User Guide
Alarms
111
Client Login Authentication
Status
6 Informational Client logs in/authenticates. Message includes:
• Client MAC Address
• Authentication Type = None, ACL, RADIUS
MAC, 802.1X
• Cipher Type = None, WEP, TKIP, AES
• Status = Allow, Deny
• SSID to which client is connecting
Sample Message:
<client mac address> | Status = <value> | SSID =
<value> | Auth Type = <value> | Cipher Type =
<value>
Client De-Authentication Status 6 Informational Client de-authenticates. Message includes:
• Client MAC Address
• Cipher Type = None, WEP, TKIP, AES
• Status = De-authentication reason, which
can be any of the following:
– Unknown reason
– Stale authentication information
– Authenticated STA leaving BSS
– Inactivity
– Association error
– Class 2 frame received from
non-authenticated STA
– Class 3 frame received from
non-associated STA
– Associated STA leaving BSS
– STA requesting information, but not yet
authenticated
– Enhanced security (RSN) required
– Enhanced security (RSN) used
inconsistently
– Invalid Information Element
– MIC Failure
– WPA module de-auth
• SSID to which client was connected
Sample Message:
<client mac address> | Status = <value> | SSID =
<value> | Cipher Type = <value>
RADIUS Accounting Start and
Stop Messages
6 Informational Start and Stop accounting messages for wireless
clients.
CLI Configuration File Start
Execution
6 Informational CLI configuration file execution starts.
CLI Configuration File End
Execution
6 Informational CLI configuration file execution ends.
Syslog Message Name Priority Severity Description