EasyManuals Logo

Proxim ORiNOCO AP-800 User Manual

Proxim ORiNOCO AP-800
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Device Configuration
ORiNOCO
®
802.11n Access Points - Software Management Guide 31
Tabulated below are ‘Link Integrity’ parameters and the method to configure the configurable parameters:
Click OK and COMMIT, to save the configured parameters.
5.2.2.1 Link Integrity Server Table
The Link Integrity Server Table displays the list of pre-configured servers. Atleast one server should be added to the table, to
enable the link integrity feature on the device.
Link Integrity Server Table - Add Row
To add a server:
1. Click Add in the Link Integrity screen, the Link Integrity Server Table - Add Row screen appears.
Parameter Description
Status Specifies the status of the link integrity feature on the device.
By default, it is disabled. To enable, select Enable from the drop down menu.
Polling Time Specifies the time interval, during which the device will check the link integrity with its
configured server(s) by sending the ICMP echo probes.
By default, the Polling Time is 30 seconds. To configure, enter the time interval between 5
seconds - 180 seconds.
Offline Polling Time Specifies the time interval, during which the device will send the ICMP echo probes to
server(s) in offline mode (When the Link status is DOWN).
By default, the Offline Polling Time is 1 second. To configure, enter the time interval
between 1 second - 5 seconds
Polling Retries Specifies the number of attempts made by the device in sending the ICMP echo probes to
the server(s), before declaring the overall link status as DOWN.
By default, the Polling Retries taken is 2. To configure, enter the number of attempts
between 1-10
Link Status Specifies the connectivity status between a server and a device. Link Status can either be UP,
DOWN or NONE.
UP: Specifies the status of the link when AP device receives the server’s
acknowledgment.
DOWN: Specifies the status of the link when AP device does not receive the server’s
acknowledgment.
NONE: Specifies the status of the link when the AP device is trying to connect to the
server(s), that is when the Link Status is neither UP nor DOWN.

Other manuals for Proxim ORiNOCO AP-800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Proxim ORiNOCO AP-800 and is the answer not in the manual?

Proxim ORiNOCO AP-800 Specifications

General IconGeneral
BrandProxim
ModelORiNOCO AP-800
CategoryWireless Access Point
LanguageEnglish

Related product manuals