ORiNOCO
®
802.11n Access Points - Software Management Guide 91
Figure 6-1 System Information
In the System Information screen, you can view and configure the following configurable parameters:
Parameter Description
System Up-Time Represents the operational time of the device since its last reboot. It is a read-only parameter
and cannot be configured.
System Description Specifies the system description including the device name, current version of the firmware
and the current build number. System description cannot be configured.
System Name Specifies the name assigned to the device. To configure, enter a System Name of maximum
64 characters.
Contact Specifies the contact information (Email id, Phone number, Location) of the person
administering the device.
To configure, enter the Contact information of maximum 255 characters.
Email Specifies the email address of the person administering the device.
To configure, enter an email address of minimum 6 and maximum 32 characters in the
Email box.
Phone Number Specifies the phone number of the person administering the device.
To configure, enter a phone number of minimum 6 and maximum 32 characters in the
Phone Number box.
Location Specifies the location where the device is installed.
To configure, enter a location name of maximum 255 characters in the Location box.
To Next Page
Loading...
Need help?
General
