ORiNOCO
®
802.11n Access Points - Software Management Guide 93
Figure 6-3 License Information
: The above screenshot represents the licensed information of AP-8100. Licensed Features vary depending on your
device.
You can view the following license information:
Parameter Description
Product Description Specifies the device description.
Number of Radios Specifies the number of radios that the device is licensed to operate with.
Number of Ethernet
Interfaces
Specifies the number of ethernet interfaces available on the device.
Radio 1 allowed
‘Frequency Band’
Specifies the operational wireless frequency band supported by the device on Radio 1.
Radio 2 allowed
‘Frequency Band’
Specifies the operational wireless frequency band supported by the device on Radio 2.
Maximum Output
Bandwidth
Specifies the maximum output bandwidth limit of the device. It is represented in Mbps.
Maximum Input
Bandwidth
Specifies the maximum input bandwidth limit of the device. It is represented in Mbps.
: The Input and Output Bandwidth features are referred with respect to the wireless
interface. That is, input bandwidth refers to the data received on the wireless
interface and output bandwidth refers to the data sent out of the wireless interface.
Maximum
Aggregate
Bandwidth
Specifies the cumulative bandwidth of the device which is the sum of configured output and
input.
Product Family Specifies the product family of the device.
Product Class Specifies the product class of the device. ORiNOCO
®
802.11n Access Points are indoor
devices.
Allowed Operational
Modes of Radio 1
Specifies the operational modes allowed on the wireless interface (radio) 1.
To Next Page
Loading...
Need help?
General
