ORiNOCO
®
802.11n Access Points - Software Management Guide 110
Figure 6-20 SNMP Trap Host Table Add Row
Configure the following parameters:
Click Add, to add an entry to the SNMP Trap Host Table.
6.3.4 SYSLOG Host Table
System log messages are generated by the device by sending requests at various instances to the system log server. The
system log messages are lost on device reboot. Navigate to MANAGEMENT > Services > SYSLOG Host Table, the
configuration screen appears.
Figure 6-21 SYSLOG Host Table
Parameter Description
IP Address Specifies the IP address to which SNMP traps will be delivered. To configure, enter the IP
address in the IP Address box.
Password To access SNMP traps, enter password in the Password box. A minimum of 6 and a
maximum of 32 characters are allowed.
: Applicable only to SNMP version v1-v2c.
Comment Enter any comments in the Comment box.
Entry Status Select the Entry Status as either Enable or Disable from the drop down menu.
To Next Page
Loading...
Need help?
General
