ORiNOCO
®
802.11n Access Points - Software Management Guide 67
Tabulated below are the ‘QoS Profile’ parameters and the method to configure the configurable parameters:
Click OK and COMMIT, to save the configured parameters.
: QoS Profile Name is applicable only to wireless interfaces.
5.6.5 QoS Policy
Navigate to CONFIGURATION > QoS > QoS Policy. The Qos Policy screen appears.
Figure 5-29 QoS Policy
Tabulated below are the ‘QoS Policy’ parameters and the method to configure the configurable parameters:
Parameter Description
QoS Profile Name Represents the QoS profile name. It is a read-only parameter and cannot be configured.
: By default, the available QoS Profile Name is ‘Default’.
Policy Name Specifies the QoS policy name. By default, the QoS Policy Name is Default.
EDCA Profile Name Specifies the EDCA Profile Name. By default, the EDCA Profile Name is Default.
QoS NoACK Status Specifies the QoS profile acknowledgement status. By default, the QoS NoACK Status is
disabled. To configure, select either Enable or Disable from the drop down menu.
Parameter Description
Policy Name It represents the QoS Policy Name. It is a read-only parameter and cannot be configured.
To Next Page
Loading...
Need help?
General
