Tsunami MP-8100 Installation and Management Guide 148
The parameters displayed in this page are explained in the following table.
6.1.2 Wireless Statistics
Wireless Statistics screen displays the details of the wireless interface.
To view the Wireless Statistics, click MONITOR > Interface Statistics > Wireless1.
Field Description
Type This parameter displays the type of interface. The
interface type is differentiated based on the network
layers.
MTU This parameter displays to the largest size of the data
packet received/sent on the interface.
Physical Address This parameter displays the MAC address at the
Ethernet protocol layer.
Operational Status This parameter displays the current operational state of
the interface.
In Octets This parameter displays the total number of the octets
received on the interface.
In Ucast Packets It displays the number of subnetwork- unicast packets
delivered to the higher level protocol.
In NUcast Packets This parameter displays the number of non-unicast
subnetwork packets delivered to the higher level
protocol.
In Errors This parameter displays the number of inbound packets
that contained errors and restricted them from being
delivered.
Out Octets This parameter displays the total number of octets
transmitted out of the interface.
Out Ucast Packets It displays the total number of packets requested by the
higher level protocol and then, transmitted to the
non-unicast address.
Out Discards This parameter displays the number of error-free
outbound packets chosen to be discarded to prevent
them from being transmitted. One possible reason for
discarding such a packet could be to free up buffer
space.
Out Errors It displays the number of outbound packets that could
not be transmitted because of errors.
To Next Page
Loading...