Tsunami MP-8100 Installation and Management Guide 200
Management
Power Supply
LEDs
Category Specification
Local RS232 serial CLI (up to 115200 bps)
Remote • Telnet and SSH, Web GUI (http) and SSL (https), TFTP
• SNMP v1, v2c and v3
• SNMP trap and Syslog
Category Specification
Input Voltage • Via RJ-45 Ethernet interface supplying 48v and
0.67A on Ethernet Port#1
• 12 V-DC through serial port (for diagnostic purpose)
• Consumption 6 Watt typical (17 Watt max with
heater on)
Output Voltage 42 to 60 V-DC through Ethernet Port#2 (802.3af
compatible). Power Always On.
Power over Ethernet Injector • Input: 100 – 250 V-AC (47 – 63 Hz)
• Output: 48 V-DC at 0.67 A (32 Watt)
• Pin-out: +48 V on pins 4/5, -48 V on pins 7/8
• Size: 5.24x2.13x1.42 inches (133x54x36 mm)
• Weight: 7 ounces (200 g)
• Temp: 0 to 40 ºC
Category Specification
Types Power
Radio Activity
Ethernet Activity
Reload
RJ-11 detection
To Next Page
Loading...